High Temperature Silicone Sealant Heat Resistant to 1500°C, Flues, Stoves, Glass

Product Information

Second, a custom fitted, “CeCure Sleeve” is lowered into the chimney and mechanically attached to the top of the chimney. The CeCure Sleeve is a high density, low profile, ceramic insulation sleeve which has been reinforced with a special stainless steel fabric. Most of us don’t have an endless budget, so it’s important to be aware of the potential cost implications of different types of the flue. Our range of multi-purpose sealants are fast acting and long-lasting for a flexible and resistant seal. Choose from a number of ready to use sealants including acrylic, clear silicone and all-purpose formulas from brands including UniBond, Evo-Stik, Geocel and Gorilla.

BS 5440-1: 2008 – Flueing and ventilation for gas appliances of rated input not exceeding 70kW net (1st, 2nd and 3rd family gases). Part 1 – Specification for installation of gas appliances to chimneys and for maintenance of chimneysTo seal small leaks and patch up areas around your home needing attention, we have a selection of repair wraps, tapes, adhesives and tools to complete the job. If you need to seal or repair surfaces that require heat resistance, our range of fire rated sealants are ideal for treating fireplaces, internal flue pipes and boilers. What is the maximum output in kW of your "5kW" wood burning stove? The majority of manufacturers just specify the “nominal output” and this figure means very little in real life. The nominal is a figure the manufacturer chooses to sell the stove at - the stove is capable of reaching at least this output with one fuel load. Nominal means "capable of". But it is not the maximum. YouTube sets this cookie to measure bandwidth, determining whether the user gets the new or old player interface. Usually, if you take a walk outside, you’ll be able to see the flue mounted on the wall. The flue will be placed on the wall closest to the boiler, and from the outside of the house, you’ll be able to spot the end of the pipe.

BS 5440 Part 1: 2008 (1) does not state exactly what material is to be used to seal and secure. Where a manufacturer provides specific guidance on how to correctly seal and secure the chimney/flue, this guidance shall be followed. The applicator plug is then pulled downward through the CeCure Sleeve to press it firmly into the first coating of HeatShield Cerfractory Flue Sealant with the added drying accelerator.Chimney: should have pipes made from masonry or metal and in similar fashion, be sealed with aluminum flashing and high-temperature silicon caulking. If, during installation, Gas Safe registered engineers are unable to confirm the suitability of a sealant, eg, an expanding foam product or silicone, from both the boiler and sealant manufacturers, then the sealant product should not be used. This Technical Bulletin has been written by the Large Business Forum (LBF) to provide guidance for Gas Safe registered engineers to ensure horizontal chimneys/flues and their terminations are correctly secured and sealed. This is not a nugget of information many of us store at the forefront of our minds, so don’t panic if you don’t know off the top of your head.