JENOLITE Rust Remover Thick Liquid | Non-Drip Formula | Fast Acting Rust Treatment | Removes Rust Back To Bare Metal | 150g

Product Information

Flush your radiator out of any debris, as this can cause corrosion and rust to appear. This should be done when first installing a new radiator, but can be done to existing ones as well. We left sections of 1mm unpainted mild steel to gently corrode outside over the course of several months, then let them thoroughly dry before treating both sides with our products, carefully following the instructions. We hope that this blog post has been useful for helping remove rust from your radiator. If you need any advice, get in touch with us and we'd be happy to help. And if, after all this, you find yourself in that rare situation where your radiator can't be salvaged, you can always invest in a fancy new radiator!

The next stage is to prepare the radiator for the rust removal chemicals to be applied. First, place a large sheet beneath the radiator to protect the flooring, whether this is carpet or hardwood. The next step is to pour a good amount of Jenolite’s Rust Remover Gel into a plastic container, and then using a paint brush, spread the gel onto the radiator, paying most attention to any areas significantly affected by rust. Shake the can well before use so that the agitator ball can be heard rattling. Then apply the aerosol in smooth motions from 15-30cm away. Coat the surface with a thin and even layer, wait two hours for the alloys to fully cure. How to remove rust from a chrome bumperIt’s always best to have a clean surface to work with. Cleaning ensures any barrier such as grease or oil is stripped and the product is able to soak in and work well to remove rust stains. Use a degreaser for the most effective results. Spray rust stain remover onto the stain or stains IDEAL FOR USE ON: Automotive rust spots, bodywork, chassis, wheel arches, tools, bikes, boats, caravans, gates, garden furniture, etc

The solution works by turning the iron oxides which cause rust into a protective chemical barrier. The protective barrier acts as a primer, allowing the metal to be painted over again.

FUEL TANKS: Safe for use on rusty fuel tanks - simply pour in and leave to work. Turn, tank every few hours until all rust is removed How to remove rust marks from outdoor tiles - usually caused by outdoor furniture or metal cans left on the floor as mentioned above Some people may find that rust converter is a simpler way forward. Rust converter transforms hard to remove rust into a bare and stable compound ready for you to paint over. A rust converter actually stops the condition of the rust from getting worse and can be an easier option if your problem is particularly stubborn. However, for automotive applications, we recommend doing the job properly with rust remover. How To Apply Rust Converter

The next step is to actually remove the rust stains from the tiles. Because the rust was not caused by the tiles themselves, a rust remover like Jenolite might be too harsh and it is not needed to remove marks as a result of rust. Instead, use a stain remover such as Jenolite’s 500ml Rust Stain Remover Spray. If you are still unsure of the differences between rust remover and converter or want to know which method is the best for your rust removal project, read our article Rust remover vs rust converter. Other questions we get asked How to remove rust from alloy wheels

Preventing rust in the future 

Carrying out rust removal is a much longer process which requires more time and patience. As the remover needs working continually you can’t just leave the product to work its magic, you have to make it a real project. Use a brush to apply the rust remover to your car and make sure all the rusted areas are covered well. Keep the substance active This blog post will show you how to remove rust marks from tiles effectively using professional standard products. The method we go through below covers how to remove rust from floor tiles in any material and answers questions such as:

How to remove rust from ceramic tiles - again, most likely in the bathroom spreading from metal fixturesOne side of the steel sample was left unpainted while the other was sprayed with a single coat of primer and acrylic top coat, replicating a typical DIY repair. Once dry, the samples were then doused daily in salty water for four weeks to encourage any corrosion to reappear. We then scored them on ease of use, rust-resisting performance and price. Verdict Any spillage or rust remover on sound painted surfaces not being refurbished should be washed off immediately with water. If white deposits appear on the derusted surface within one hour of drying it is due to humidity. Re-apply the rust remover for five minutes and immediately wipe dry. To help you achieve this, we offer a full suite of rust treatment products, including: Car rust remover Routinely bleed your radiator, keeping the water flow stable and not letting old water sit in it for too long.